Solder Supplies
Solders are indispensable bonding materials in all the electronics used in our daily lives.
In the days of using large electronic devices, all the soldering was done by man, but with the development of technology,
The machine does all the work. In addition, environmental regulations have been tightened, and now many places do not use Sn-Pb.
Lead-Free Solder is used instead.
-Wave Soldering Machine Used to inject solder into POT.
-Generally, POT solder input amount is about 200 ~ 400Kg.
-Wave Solderingsi Ass’y doen Board lideue Soldering doemyeonseo bujoghan Solderui yang-eul bochunghae juneunde sayongdoem.
-Where the person wants to solder in the process of soldering or It is widely used for the parts that need to be soldered using robots.
-Solder Paste on Bear Board using SMT (Surface Mount Technology) Where soldering is done using reflow machine after coating and mounting parts Used.
-Solder Paste is refrigerated to prevent deterioration due to product characteristics. In use, leave it at room temperature 2 hours before blocking condensation.
-The main components of Flux are rosin, resin, thinner, activator, etc. Consists of
-In soldering process, Flux is used for soldering with contaminants on the substrate Improves solderability by preventing surface oxidation due to high temperatures.
-There are several types depending on the amount of solids remaining.
-Leave at room temperature for about 2 hours before using the solder cream stored in the refrigerator Often does not work well in the process of It is the cause.
-To solve this part, take it out of the refrigerator and put it in After 2 hours, it is possible to stir so that it can be kept at room temperature. Help.
-Solder paste loaded in the show window refrigerator Help with inventory management and first-in, first-out, up to 18 (9Kg) Can be archived.
-Solder Paste can be stored under the most optimized temperature conditions As a refrigerator to use, temperature control is possible to 0-10 degrees Celsius and inventory control Convenient show window case for convenience.
-In the process of mounting parts and soldering on the printed circuit board Manual dipping machine is used to solve the inconvenience of working with the iron.
-Helps workers to work more easily in their work and research and development.
-The label separator, which is essential for the job site, has a sensor Adjustable speed and easier for operator to remove label It is produced in various sizes and lengths and has excellent workability.